400/480 Volt ProBlue Adhesive Melters
E-7
Part 1024496_06
2014 Nordson Corporation
Installation Kit Components
The following components are shipped with the transformer.
NOTE: These components are in addition to the components that are
provided in the melter installation kit.
Figure E‐2 Installation Kit
1. Voltage plug, 400 volt (Black wires)
2. Voltage plug, 480 volt (White wires)
3. Conduit plate
4. Cable clamp
5. M5 x 10 screws
6. M5 Washers
To Next Page
Loading...
