Nordson PURBlue 4 - Appendix B Operating Parameters; Standard Parameters

Operating Parameters
B-1
Part 1120277_01
E 2012 Nordson Corporation
Appendix B
Operating Parameters
Operating parameters are organized in this appendix according to the logical
groups listed in Table B-1. For information about selecting and editing
operating parameters, refer to Section 3, Installation, Setting Up the Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B-1 Parameter Groups
Group
Parameter
Numbers
Group Description
Standard
0to8and
10 to 14
Frequently used parameters
Pressure Control 15 to 17 Configure pressure settings
Temperature
Control
20 to 29 Control heater function
Input Setup 30 to 39
Configure the standard and optional
inputs
Output Setup 40 to 46
Configure the standard and optional
outputs
PUR Timer 49 Set the PUR timer
Seven-day Clock 50 to 77 Configure the clock feature
Automatic Fill
Timer
78
Configure the external motor control
switch
PID Selection 80 to 91 Configure the PID settings