Saving current settings
+
Restoring current settings
+
Installation
3-30
Part 1120277_01
E 2012 Nordson Corporation
Save and Restore Melter Settings
The current value of all editable operating parameters and the setpoint
temperature of each component can be saved and, if necessary, restored at
a later time. When saved settings are restored, they overwrite the settings
that are presently in use.
This save-restore feature i s useful in instances where the settings that are in
use are deliberately or accidentally changed and you need to return the
melter to its pre-change setup.
To save current settings
With the melter in the automatic scan mode, simultaneously press the
number 1 key and the Setup key.
S-1 appears momentarily in the right display.
To restore saved settings
CAUTION! All melter settings will be deleted! Before restoring saved
settings, ensure that use of the restored settings will not disrupt the current
process or create an unsafe operating condition.
With the melter in the automatic scan mode, simultaneously press the
number 2 key and the Setup key.
S-2 appears momentarily in the right display.
To Next Page
Loading...
