EasyManua.ls Logo

Nordson PURBlue EC - Section 9 Technical Data; General Melter Specifications

Nordson PURBlue EC
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Data
9-1
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Section 9
Technical Data
General Data
Storage temperature
45°C to + 75 °C 49 °F to + 167 °F
Min. ambient temperature
5 °C 23 °F
Max. ambient temperature
40 °C 104 °F
Humidity 10 to 95 %, not condensing
Max. operating height
above sea level
3,000 m 9840 ft
Type of heating Heater cartridges (grid and reservoir / heating plate) +
band heater (hopper)
Temperature sensor Ni 120
Measuring precision
" 1 °C
Material pressure (standard) The pressure control valve is preset at the factory. Default:
35 bar 3500 kPa 508 psi
Degree of protection IP 54
Noise emission
at a distance of 1 m
1 motor: 62 dB(A)
Motor type 3 ph AC motor
Gear box type Helical gear
Motor/pump speed setting
range
1.0 to 100 min
-1
To prevent excessive wear, the motor/pump speed should not continuously
fall below 5 min
-1
(rpm) or continuously exceed 80 min
-1
(rpm).
Heatup time <45 min
Melting capacity 20 kg per hour

Table of Contents

Related product manuals