Installation
3-3
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Exhausting Material Vapors
Ensure that material vapors do not exceed the prescribed limits. Always
observe the safety data sheet (MSDS) for the material to be processed. If
necessary, exhaust material vapors and provide sufficient ventilation of the
location of the system.
Fig. 3-4 Principle drawing
Installation Personnel’s Experience
The instructions contained in this section are intended for personnel with
experience/authorization in the following fields:
S Application methods with hot melt adhesive or similar materials
S Industrial electrical wiring of power and control lines
S Industrial mechanical installation
S General knowledge of process control.
CAUTION: Illuminated seals may not be installed in the application system.
To Next Page
Loading...
