Nordson VersaBlue VA - Important for Mechanical Pressure Control Valve

X
+-
Maintenance
5‐11
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Important for Mechanical Pressure Control Valve
Measuring Insertion Depth
Measure and make a note of the insertion depth of the setting screw
(dimension X). This way the insertion depth can be replicated after
reassembly.
Adjusting Setting Screw
Adjust the setting screw to the recorded dimension X.
 Turning to the right increases material pressure.
 Turning to the left decreases material pressure.