1
3
2
Fig. 3‐1
4
Fig. 3‐2
Installation
3‐1
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Section 3
Installation
ATTENTION: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions here and in the entire documentation.
Transport
Refer to section Technical Data for weight. Use only suitable transport
devices.
If possible, use the pallet (3) that came with the melter and use angle
brackets (2) to fasten the melter.
Use a sturdy box (1) or the folding box (4, Fig. 3‐2) to protect from
damage.
Protect from humidity and dust.
Avoid jolts and vibrations.
Storage
CAUTION: Do not store melter outside! Protect from humidity, dust and
extreme temperature fluctuations (formation of condensation).
Unpacking
Unpack carefully and check for damage caused during transport. Save pallet,
angle brackets and box for later use, or dispose of it properly according to
local regulations.
To Next Page
Loading...
