Table of Contents
IV
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Operation 4‐1..............................................
General Information 4‐1......................................
Channel Numbers 4‐1.....................................
On the Control Panel 4‐1.................................
On the Field Bus 4‐2....................................
Transparent Keys 4‐2......................................
Keys with and without Indication Lamp 4‐2....................
Meaning of Colors 4‐2.....................................
Description of Symbols 4‐3.................................
Standard Symbols of Temperature Channels 4‐3............
Input Window 4‐4.........................................
Screen Replacing Motor Controller 4‐4.......................
Status Display 4‐5........................................
Initial Startup 4‐6............................................
Purging Melter 4‐6........................................
Control Panel Settings 4‐7...............................
Standard I/O: Observe for Edge-controlled Signals
(Example) 4‐8..........................................
Note on Recipes 4‐11.......................................
After the First Day 4‐11.....................................
Control Panel - Overview - 4‐13..............................
Working with Application Groups and
Numbering of Temperature Channels 4‐18..................
Filling Tank 4‐21..............................................
Manually 4‐21.............................................
Level Display and Control (Options) 4‐22......................
Automatic Tank Filling 4‐22...............................
Maximum Level 4‐22.......................................
Recommended Temperature Setpoints 4‐23.....................
Heatup Guided by Reference Channel 4‐24......................
Undertemperature Interlock 4‐25...............................
Motor Startup Protection 4‐25..................................
Acknowledging Startup Protection 4‐25.......................
Daily Startup 4‐26............................................
Daily Switchoff 4‐27...........................................
Switching Off in an Emergency 4‐27.............................
Control Panel of the Industrial PC (IPC) 4‐28......................
Melter Modes ‐ Overview ‐ 4‐28..............................
Screen Saver 4‐29.........................................
Starting Screen 4‐29.......................................
Temperature Parameters 4‐30...............................
Important 4‐30..........................................
Example: Increase Setpoint Temperature 4‐31...............
Parameters (Screen 1: Alarm Values) 4‐32..................
Graphic Presentation of Temperature Parameters 4‐34........
Monitoring of Heatup and Cooling 4‐35.....................
Parameters (Screen 2: Activate Channel, Mode,
Controlled System Heating Rate) 4‐37......................
Parameters (Screen 3) 4‐38...............................
To Next Page
Loading...
