Nordson VersaBlue VZ100 - Page 74

System ready
Operation
4-8
P/N 7105144G
 2008 Nordson Corporation
VersaBlue_NW
Initial Startup (contd.)
4. Set seven-day clock.
Refer to Control Panel − Overview − / V8
5. Assign passwords and select security level, if desired.
Refer to Appendix A, Password and Control Panel − Overview − / V18,
V19.
6. Wait until the system is ready for operation (Fig. 4-6).
7. Tighten the gland on pump(s) (Refer to section Maintenance).
Fig. 4-6
8. Enable the motor(s) (Fig. 4-7).
9. Switch on the motor(s) (Fig. 4-7).
M2M1 M2M1
Control panel AND
standard I/O
Control panel
Standard I/O (XS 2)
All motors ON/OFF
(collective enable)
Standard I/O (XS 2)
Enable motor 2
Standard I/O (XS 2)
Enable motor 1
Fig. 4-7 Conditions for Motor running with and without interface Standard I/O