Do you have a question about the Nordyne MGBB-070A AA FC-01 and is the answer not in the manual?
Instructions for cutting floor openings and fuel line holes.
Procedure for cutting ceiling and roof openings for the furnace.
Steps for cutting the duct opening for the furnace connection.
Instructions for installing the furnace mounting plate.
Steps for installing the furnace duct connector.
Procedure for placing and securing the furnace onto the duct connector.
Steps for installing the roof jack assembly and connecting flue pipes.
Instructions for connecting the main power supply wires to the furnace.
Detailed steps for lighting pilot models.
Troubleshooting steps when the main burner does not ignite.
Issues when gas valve has power but no main flame.
Steps to diagnose pilot light issues.
Troubleshooting steps for improper main flame.
Troubleshooting when the burner motor doesn't run.
Issues when blower runs but no flame is present.
Troubleshooting ignitor not heating.
Steps when 120V is present but ignitor is not heating.
Diagnosing burner lockout after ignition.
No gas flow when 24V supplied.