ENGLISH
C 4 Turn the lock counterclockwise to unlock
(A) and remove the retaining frame (B).
C 5 Remove the shaving heads and place the
new shaving heads in the shaving unit.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
6 Replace the frame and turn the lock
clockwise until it locks into place.
C 7 Insert the notch of the shaving unit into
the slot in the top of the shaver (1) and
then close the shaving unit (2).
C 8 Press and hold the on/off button for at
least 5 seconds to reset. The orange shaver
head replacement indicator symbol will go
out.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This shaver has no other user-serviceable parts.
For assistance call 1-800-243-3050.
23
1
2
5 sec.5 sec.
A
B
To Next Page
Loading...
Need help?
General
