Do you have a question about the Noritz NRC111-DV and is the answer not in the manual?
Brand | Noritz |
---|---|
Model | NRC111-DV |
Category | Water Heater |
Language | English |
Explains safety alert symbols and risk levels (DANGER, WARNING, CAUTION).
Warns about explosion risk from flammable liquids and vapors.
Warns about severe burns from hot water over 125°F.
Warnings regarding displaced, clogged, or damaged exhaust pipes.
Steps to take if a gas leak is detected or during emergencies.
Do not use the water heater if any part has been under water.
Warning about the temperature and pressure relief valve and potential explosion hazard.
Instructions on correct placement of the exhaust vent terminal to prevent hazards.
Prohibits installation in specific locations like RVs or boats due to CO poisoning risk.
Warnings against storing flammable liquids or combustibles near the heater.
Ensures the supplied gas and power match the rating plate specifications.
Reiteration that installation and service must be by a qualified professional.
Advice on not drinking stagnant water or first use hot water.
Instructions on cleaning and handling the remote controller to prevent damage.
Measures to prevent damage from freezing, especially during long periods of non-use.
Advise to check air inlet and vent terminals for blockages during snowy conditions.
Explains that the unit discharges condensate and how to handle the drain pipe.
Explains that white steam from the vent terminal is normal during operation.
Identifies key parts of the main indoor/outdoor wall-mounted unit.
Identifies key parts of the NRC111-DV indoor wall-mounted unit.
Identifies and explains the functions of the remote controller's display and buttons.
Outlines the four essential steps to prepare the water heater before first use.
Instructions on turning the unit on and how the temperature is displayed on the remote.
Reinforces warnings about high temperatures and checking water before use.
Steps to prepare and set the temperature before configuring the flow meter alarm.
Guide on setting the flow meter alarm level and its function.
Explains how the alarm indicates when a tub is full or other scenarios.
Instructions on how to mute the sounds emitted by the remote controller.
Steps to adjust the upper limit of the hot water supply temperature.
Explains how the unit automatically prevents freezing and limitations.
Specific steps to take for preventing freezing in extremely cold conditions.
Steps to follow if the water heater or piping becomes frozen.
Steps to follow to safely turn the unit back on after draining or a long period of non-use.
Emphasizes filling the neutralizer unit with water to prevent dangerous gas entry.
Lists items to check periodically for proper operation and safety.
Instructions for cleaning the exterior of the unit and the remote controller.
Step-by-step guide to cleaning the filter on the water drain valve.
Information about optional isolation valves for testing and flushing.
Common issues during initial operation and their solutions.
Addresses problems with no hot water, incorrect temperature, or slow heating.
Addresses issues with fluctuating hot water temperatures and flow amounts.
Discusses constant, tub fill, and decreasing hot water amounts.
Common problems with the remote controller's display, buttons, or power.
Explains normal operating sounds and fan operation for freezing prevention.
Checks for issues when the heater stops operating or produces white smoke.
Explains causes for turbid/blue water and lists water quality standards for warranty.
Explains how error codes are displayed and provides a table of codes, causes, and actions.
Details on what information is needed when requesting service and contact information.
Mentions warranty registration, terms, and stocking periods for repair parts.
Advice on confirming gas and power supply availability for reinstallation.
Explains the need for conversion kits and professional installation for different gas types.
Lists conversion kits for specific models and the parts included in the kit.
Details necessary adjustments, pressure verification, and leak checks after conversion.
Provides detailed specifications for NRC111-SV and NRC111-DV models.
Details performance metrics like gas consumption, hot water capacity, and temperature settings.