Norpe NRC-100 - User Manual

To Next Page

NRC-100-SÄÄTIMEN HUOLTO-OHJE

SERVICEINSTRUKTIONER FÖR NRC-100-KONTROLLENHET

SERVICEINSTRUKSJONER FOR KONTROLLENHETEN NRC-100

SERVICE INSTRUCTIONS FOR NRC-100 CONTROL DEVICE

WARTUNGSANWEISUNG FÜR STEUERUNG NRC-100

KONTROLLSEADME NRC-100 HOOLDUSJUHEND





GEBRUIKSINSTRUCTIES VOOR BEDIENINGSAPPARAAT NRC-100



Need help?

Do you have a question about the Norpe NRC-100 and is the answer not in the manual?

Summary

Describes the controller display, keys, and basic user interaction for monitoring and programming.

Explains the function of each key (UP, DOWN, FNC, OK) for menu navigation and value adjustment.

Details how to access the Measuring, User, and Service menus using specific key combinations.

Lists parameters available in the Measuring menu, including setpoints, defrost times, and probe types.

Covers user-adjustable settings like setpoint values (St1, St2) and defrost differentials (dIF1, dIF2).

Provides access to advanced service settings, including compressor modes, probe configurations, and system parameters.

Explains normal operating signals, defrost indications, and error messages (Err1-Err6) for troubleshooting.

Instructions on how to manually initiate a defrosting cycle using the UP key.

Method to view the controller's firmware version by holding the DOWN key.

Step-by-step guide to changing the setpoint values (St1, St2) via the User menu.

Procedure to view temperature readings from different probes (thermostat, evaporator, cabinet) in the Measuring menu.

Guide to changing compressor operating modes (e.g., single, dual, cycling) through the Service menu.

Instructions for locking or unlocking the controller display to prevent unauthorized access or changes.

General