Nortek 2GIG eSeries GC2e - Programming Question Table; Q1-Q7, Q13-Q19

To Next Page

To Previous Page

GC2e Wireless Security System | Installation and Programming Guide

Programming Question Table

Q# Programming Question/Sub-Question Default Setting

Q1 Select RF Sensor # (01-48,63-74)

Select RF Sensor # Type (00) Unused

Select RF Sensor # Equipment Type

Varies by RF sensor type

Only shown for some sensor types

Select RF Sensor # Equipment Code (0000) Other

Enter RF Sensor # Other Equipment Code (0-9999)

NOTE: Only shown if (0000) Other is selected as the RF Sensor # Equipment Code

Enter RF Sensor # Serial Number (7 digits) 0000000

Select RF Sensor # Equipment Age (0 to 1) (0) New

Select RF Sensor # Loop Number (1 to 3) Varies with sensor model selected

Select RF Sensor # Dialer Delay (0 to 1)

(1) Enabled‡

(2) Disabled (for Fire and CO only)

Construct RF Sensor # Voice Descriptor No Default Setting

Select RF Sensor # Reports (0 to 1) (1) Enabled

Select RF Sensor # Supervised (0 to 1) (1) Enabled

Select RF Sensor # Chime (0 to 13) (0) Disabled

Q2 Select Wired Sensor # (1 to 2)

Select Wired Sensor # Type (00) Unused

Enter Wired Sensor # Equipment Code

Select Wired Sensor # Equipment Age (0 to 1) (0) New

Select Wired Sensor # Normal State (0 to 3) (0) Not Used

Select Wired Sensor # Dialer Delay (0 to 1) (1) Enabled‡

Construct Wired Sensor # Voice Descriptor (0 to 1) ‡ No default

Select Wired Sensor # Reports (0 to 1) (1) Enabled

Select Wired Sensor # Chime (0 to 13) (0) Disabled

Q3 Select Fob # (1 to 8)

Select Fob # Used (0 to 1) (0) Unused

Select Fob # Equipment Code (0000) (0000) Other

Enter Fob # Other Equipment Code (0 to 9999)

NOTE: Only shown when (0000) other is selected as the Fob # Equipment Code

Enter Fob # Serial Number (7 digits) 0000000

Select Fob # Equipment Age (0 to 1) (0) New

Select Fob # Emergency Key (0 to 4) (0) Disabled

Select Fob # Key 2 Can Disarm (0 to 1) (1) Enabled

Construct Fob # Voice Descriptor Keyfob #

Select Fob # Arm No Delay (0 to 1) (0) Disabled

Select Fob # Key 4 Output (0 to 2) (0) Disabled

Q4 Select RF Keypad # (1 to 4) (0) Unused

Select RF Keypad # Used (0 to 1) (0000) Other

Select RF Keypad # Equipment Code

Enter RF Keypad # Other Equipment Code (0 to 9999)

NOTE: Only shown if (0000) Other is selected as the RF Keypad # Equipment Code

Enter RF Keypad # Serial Number (7 digits) 0000000

Select RF Keypad # Emergency Age (01) (0) New

Select RF Keypad # Emergency Keys (01) (1) Enabled

Construct RF Keypad # Voice Descriptor Keypad #

Q5 Enter Exit Delay, in Seconds (45 to 120) 60 seconds‡

Q6 Enter Entry Delay 1, in Seconds (30 to 240) 30 seconds‡

Q7 Enter Entry Delay 2, in Seconds (30 to 240) 45 seconds‡

Q13 Select Two-Way Voice (0 to 2) (1) Stay Online

Q14 Select Silent Panic/Burglary Listen Only (1 to 1) (1) Enabled

Q15 Select Dialing Type (0 to 1) (0) Touch Tone

Q16 Select Police Emergency Key (0 to 2) (1) Audible

Q17 Select Fire Emergency Key (0 to 1) (1) Audible

Q18 Select Emergency Key (0 to 1) (1) Audible

Q19 Select Quick Arming (0 to 1) (1) Enabled

Q20 Select Swinger Shutdown Count (1 to 6) (2) Two Trips‡

Main Page

Nortek 2GIG eSeries GC2e - Programming Question Table; Q1-Q7, Q13-Q19

Table of Contents

Related product manuals