Nortek 2GIG GC2 - Page 39

Sensor Types (Zones)
Copyright © 2016 Nortek Security & Control
37
†IndicatesSensortypesthatarenotallowedforhardwiredloops.
*SensorTypeReportingisonlysupportedonAlarm.com.
(32)RemoteDevice* Thiszonetypeisselectedbytheinstallerwhenpairingthepanelwithperipheraldevicesthatcanutilize
localizedtroubles(suchasRFjam, lowbattery ,tamper,orAClossdetectedbytheperipheraldevice).This
sensoriscontinuouslyactiveandwillcauseatroubleatthepanelfor
allproblemconditions.Whenthe
panelisinanarmedstate,thissensortypewillcauseanalarmforTAMPERandRFJAM.Alltrouble
conditionswillbesenttothemonitoringstationifreportingisenabledwiththeexceptionofACLOSS.This
willonlydedisplayedatthe
panel.
SensorType(Zone) Description