11
Mounting the Master with the Optional DMCBT
Bluetooth Player (continued)
8. Insert the player audio cable’s BLACK RCA plug into the AUDIO
LEFT jack on the DMCBT Bluetooth Player, then insert the cable’s
RED RCA plug into the AUDIO RIGHT jack on the DMCBT Bluetooth
Player (see Figure 23).
9. Plug the connector from the TE2D power transformer in the wall
housing to the DMCBT Bluetooth Player’s POWER connector (see
Figure 24).
10. Be sure that the area where the DMCBT Bluetooth Player will slide
into the wall housing is free of cables and connectors that might be in
the way when the player is inserted.
11. Attach the DMCBT Bluetooth Player to the wall housing using the two
long screws provided. DO NOT OVERTIGHTEN THE SCREWS THE
FRAME MIGHT DISTORT OR CRACK!
12. Connect the two ribbon cables from the Master Station to the
connectors on the faceplate’s circuit board. The connectors are keyed
and will only fi t in one direction (see Figure 25).
13. Install the DMCBT Bluetooth Player faceplate by pressing it onto the
player (see Figure 26).
POWERING UP THE SYSTEM
After all connections have been made and the unit(s) are
installed into the wall housing, follow these steps to power
up the DMC3-4 system.
1. Turn the circuit breaker controlling the power to the wall housing
transformer(s) ON.
2. Check all functions of the system. Refer to the Owner’s Manual
supplied with the DMC3-4 Master Station for operation details. If any
diffi culties are encountered, recheck all connections.
DMCBT RIGHT
AND LEFT AUDIO
OUTPUT JACKS
DMCBT
REAR SIDE
PLUG LEFT AND RIGHT
AUDIO CABLES INTO
DMCBT PLAYER AUDIO
OUTPUT JACKS
AUDIO
RIGHT
AUDIO
LEFT
Figure 23. DMCBT Player
Audio Cable Connection
PLUG POWER CONNECTOR
FROM THE TRANSFORMER
INTO DMCBT PLAYER'S
POWER CONNECTOR
DMCBT
REAR SIDE
Figure 24. DMCBT Player Power Connection
CONNECT THE TWO RIBBON
CABLES TO THE CONNECTORS ON
THE FACEPLATE CIRCUIT BOARD
Figure 25. DMCBT Faceplate Connections
DMCBT PLAYER SLIDES
INTO BOTTOM OF WALL
HOUSING
MASTER MOUNTED IN
TOP OF WALL HOUSING
BE SURE THAT THE AREA BEHIND
DMCBT PLAYER IS CLEAR OF CABLES
SECURE DMCBT PLAYER WITH
TWO LONG SCREWS, THEN
SNAP ON THE FACEPLATE
Figure 26. Installing DMCBT Faceplate
To Next Page
Loading...