DC Inverter U-match Series Cassette Type Unit
11
For the units: GKU48(14.1)USV4DH
Fig. 4.1
Table 4.3
Unit: mm (inch)
A B C D E F
USV4DH
-
-
-
-
4.1.2 Installing the Main Body Unit
Fig. 4.2
(1). Install the hoisting stand on the hoisting screw by using nuts and gaskets at
both the upper and lower sides of the hoisting stand. To prevent the gasket
from breaking off, a gasket anchor board should be used.
(2). Install the paper template on the unit, and fix the drain pipe at the outlet