Nortek VENMARCES VHC-36 - Appendix C: Rigging Drawing; Figure C1: VHC rigging

Appendix C: Rigging Drawing
CAUTION
1. Use spreader bars and cables to apply an even vertical lifting force only at all the lifting points to prevent damage to the
unit casing.
2. Provide additional blocking and coverings (as required) to prevent damage to the unit finish and/or components.
Spreader bars
Figure C1: VHC rigging
VCES-VHC-IOM-1F – VHC-36, -42 & -50
35