Connecting for VPN Access 5
NN46110-405 (314962-D Rev 01)
The Add IP Address window appears.
6 Select the Static option and type the IP address and subnet mask that the ISP sent.
7 From the Interface Filter list, select permit all.
8 Click OK.
9 From the menu bar, select Routing > Static Routes.
10 From the Default Routes list, select Add Public Route.
The Add Public Default Route window appears.
11 In the Gateway Address box, type the default route address that the ISP provided.
12 Click OK.
13 Locate the provisioning worksheet sent by the company or provider that sent you the VPN
Router.
14 Enter the following URL in your browser window: http://192.168.1.2/manage/qs.pyc.
15 Click Manage Switch, and then type admin and setup as the user name and password. Admin
and setup are the default username and password. You should change the default password for
security reasons.
16 Follow the instructions in the window that appears.
* NORTEL NETWORKS and Nortel VPN Router are trademarks of Nortel Networks.
* Microsoft and Windows are trademarks of Microsoft Corporation.
* Netscape is a trademark of Netscape Communications Corporation.
To Next Page
Loading...
