Need help?Do you have a question about the Northern Industrial Tools 1200-LB and is the answer not in the manual?
General| Brand | Northern Industrial Tools |
|---|---|
| Model | 1200-LB |
| Category | Outdoor Cart |
| Language | English |
Read and understand all instructions. Failure to follow instructions may result in injury.
Connect left and right bottom panels and attach support tubes using M8x40 screws and nuts.
Secure the tongue support to the bottom panel using M6x16 screws and M6 nylon lock nuts.
Attach the two wheel axle support stands to the bottom panel using M8x16 screws and M8 nylon lock nuts.
Center the hitch tongue in the axle support, insert axle, and tighten hardware.
Mount wheels onto the axle using Ø20 flat washers and secure with R Pin Ø3.
Connect the left and right side panel assemblies to the bottom panel using four hinge pins.
Attach the front panel to the bottom panel with hinge pins and secure side panels with the handle.
Slide the rear panel through side panel slots and secure with pins through side panel holes.
Insert side rails into side panel holes and secure the front rail with two R pins.
Guidelines for safe and proper use of the dump cart, including load limits and towing speed.
Instructions for regular inspection, cleaning, lubrication, and upkeep of the dump cart.
Advice on cleaning, drying, and storing the dump cart to prevent damage and moisture buildup.
To Next Page