Northern Industrial Flux Core 125 User Manual (English)

Other manuals for Northern Industrial Flux Core 125

Questions and Answers:

M
Martin MasonAug 1, 2025
Why my Northern Industrial Welding System will not weld?
- B
  brendaparkerAug 1, 2025
  If your Northern Industrial Welding System won't weld, several factors could be at play. First, verify you're using the correct power input. Second, ensure proper grounding to the workpiece to address inadequate current at the output. Third, check the output cable for a poor connection. Also, remember to clean the surfaces you're working on. Finally, double-check that you are using the correct welding wire.
B
billy50Aug 8, 2025
What to do if my Northern Industrial Flux Core 125 Welding System welder does not work when turned on?
- S
  Stephanie MoralesAug 8, 2025
  If your Northern Industrial Welding System welder does not work when the main switch is turned on, there could be several reasons: * No power input: Check the circuit or fuse of the power source. * Broken power cord or plug: Replace the power cord. * Broken main switch: Replace the switch. * Broken transformer: Replace the transformer.
K
Kristin DayAug 16, 2025
How to fix inconsistent arc or wire feed on Northern Industrial Welding System?
- G
  Gerald PetersenAug 16, 2025
  If your Northern Industrial Welding System experiences inconsistent arc or wire feed, here's what you can check: 1. Drive roller pressure: Tighten the drive tension adjuster on the wire feeder. 2. Spool hub tension: Adjust the wing nut on the spool holder to correct tightness. 3. Contact tip: Replace the contact tip if it's worn or the wrong size. 4. Wire condition: Replace the wire if it's rusty or corroded.