*
Let the parts dry
completely
before the next use.
*
It is not allowed to use boiling water,
microwave oven, vaporizer or baby bottle
sterilizer for cleaning the spare parts be-
cause they might deform by heat!
*
Don’t wash the connecting
tube. Next to proper use,
the mucus can’t enter the
tube so washing the tube is
not necessary.
*
However, if there is any
mucus or liquid in the tube
then stop using the device.
Clean the tube and let it dry
completely. You can wash it
under running water and
hang it.
*
The air mesh is there to prevent solid
objects and dust from entering the housing.
*
The air mesh is not there to absorb
any mucus or liquid.
*
If the air mesh is dirty or clogged, you
can replace it.
*
It can function well for a very long time
next to the proper usage of the device.
*
Clean the housing with a dry, soft cloth.
*
Do not use any liquids, detergents or
chemicals.
*
Keep the device in a space where it is
protected from dust, direct sunlight and heat.
HINTS & TIPS
*
Dry, very thick mucus can be dissolved by a
mild saline solution. After using it, wait a few
minutes, wipe excess discharge with a tissue,
then reuse the nasal aspirator as directed.
*
Do not use more than 5 ml of saline solution
at once.
*
Do not use the Colibri
head and the device
without the collared tube.
*
While in use, the device should be in a
stable position, standing on a at surface.
*
Do not cover the vents on the back of the
device while in use. Hot air exits the device
through the vents.
*
Make sure the heat exits in a different
direction than where your child is.
*
The device should only be used
by adults.
*
Do not allow children to play
with the device, it is NOT A TOY.
To Next Page
Loading...
