35
Technical Data:
Type 18 20 22 2 4
Zoom factor 0.945 0.995 1.04 1.08
No. of cells 71 71 71 71
Projected wingspan m 9.18 9.67 10.11 10.49
- surface area m² 18.4 20.4 22.3 24.03
- aspect ratio 4.58 4.58 4.58 4.58
Flat wingspan m11.8612.49 13.05 13.55
- surface area m² 21.94 24.3 26.57 28.66
- aspect ratio 6.41 6.41 6.41 6.41
Line diameter mm 0.45/ 0.8/ 1.2
Line length m 6.8 7.16 7.49 7.77
Line consumption m 300 316 331 344
max. profile depth m 2.32 2.45 2.55 2.66
min. profile depth m 0.47 0.5 0.52 0.54
Weight kg 5.1 5.6 5.9 6.3
Legal takeoff weight* kg 70-90 80-105 90-115 100-130
* Pilot + approx. 17 to 20kg of equipment (including wing)
Changes of these data is possible: Please look after the actual version of this
manual or the technical data table on the NOVA homepage: www.nova-
wings.com/downloads
Further details concerning measurements and design may be taken from the
engineering specifications of the certification. This form can be found on the
NOVA homepage (certification documents) of asked from the NOVA office.
Line specifications are detailed in the certification certificate or in the line
plans. They are measured under a 5kg load.
The certification test centres measure overall line length from the quick link to
the undersurface.
The line lengths as specified in the line plans are of the single elements in-
cluding the end loops.
The certification label is printed onto the right wing tip.
To Next Page
Loading...
Need help?
General
