To Next PageTo Next Page
Need help?Do you have a question about the Novatek-electro REV-225 and is the answer not in the manual?
General| Brand | Novatek-electro |
|---|---|
| Model | REV-225 |
| Category | Relays |
| Language | English |
Covers lethal voltage, forbidden actions like maintenance without disconnecting, independent repair, and operation with damaged case, plus water penetration.
Details the visual appearance and setting dimensions of the REV-225 device as shown in Figure 1.
Specifies environmental conditions for REV-225 operation including temperature, pressure, and humidity.
Covers unpacking, checking for damage, and studying the operating manual before device installation.
Guidance on preparing the product for connection, including checking for damage and consulting the manual.
Instructions and warnings regarding the connection of the REV-225, emphasizing safety and proper wiring.
Explains the symbols displayed on the device and the function of the control buttons (MENU, UP, DOWN, OK).
Diagram and steps for the initial setup and configuration of the REV-225 device.
Overview of the main menu structure and navigation within the REV-225 settings.
Details on setting and displaying astronomical times like sunrise and sunset.
Procedure for setting an offset time relative to the calculated sunrise and sunset times.
Instructions for setting the device's geographic coordinates (latitude, longitude, time zone) for accurate time calculation.
Guide for setting the current time and date on the REV-225 device.
Steps for configuring the current date (year, month, day) on the device.
Instructions for configuring automatic switching between summer and winter time.
Procedure for activating and setting up the holiday or weekend mode for the device.
Configuration of the night break function, defining start and end times for load disconnection.
Instructions on how to change the display language of the REV-225.
Method for resetting the device to its original factory default configuration.
Essential safety measures to be taken during maintenance, emphasizing disabling power.
Specifies that maintenance must be performed by qualified service personnel.
Recommendation for the frequency of device maintenance, suggesting every six months.
Step-by-step guide for performing routine maintenance checks and cleaning.
