Novation Circuit Mono Station - Page 12

12
English
Term Button Denition
Setup Page Shift + Power Allows control of MIDI clock and TX / RX settings.
Normal operation is suspended while the Setup Page
is open.
Smooth Shift + Mod
Seq
Applies to the Modulation Sequence: interpolates
between successive assigned values to produce a
gradual transition.
Step By default, each Pattern is subdivided into 16 Steps:
the number of steps may be adjusted in Pattern
Settings View.
Step buttons Collective name for the button group comprising the
Note, Velocity, and Gate buttons.
Stop Mode Circuit’s operating mode when the sequencer is not
running.
Swing Shift + Tempo Adds a subtle variation to the tempo: alternate notes
are shifted in time.
Swing Sync Shift + Tap Sets a range parameter for the Swing control.
Synth Controls The upper section of the top panel: a set of controls
for the standard sections of an analogue synth, such
as Oscillator, Filter, Envelope, etc.
Tracks Three Tracks are supported – Oscillator 1, Oscillator 2
and the Modulation Sequence.
Velocity View Velocity Allows editing of the velocity of a step.
View One of various ways the 32 grid pads can be used to
display information and allow user interaction.