13
Clear – allows deletion of individual Pattern Steps, Patches, Patterns, Sessions or
automation data.
14
Save and Sessions – let you save your current Session, or open a previously-saved one.
You can also use Save to store Patches independently from Sessions.
15
Shift – several of the buttons (and two of the rotary controls) have a “second function”,
which is accessed by holding down the Shift button while pressing the button or knob in
question:
Button/knob Shifted action Shifted function
8 Scales
Paraphonic
mode
Switches between Paraphonic Modes 1 and 2
6
Note Expand Opens Expand View; doubles the size of the
playing area
Velocity Fixed Assigns a xed velocity value to each note in a
Pattern
Gate Glide Opens Glide View: allows a glide value to be
assigned to each Step
7 Pattern
Settings
Mutate Randomizes the Steps in the current Pattern
13 Clear Duplicate Operates like a copy-and-paste function for
Patterns or Steps.
5 Osc 1 Key Tracking Causes the lter frequency to track the pitch of
the note being played
Osc 2 Osc Sync Allows Osc 1’s waveform to retrigger Osc 2’s
Mod Seq Smooth Modies the action of the Modulation Sequence
Track
2 Tempo Swing Time-shifts alternate notes in the Pattern
3 Tap Swing Sync Applies a range parameter to Swing
19 Fine Pulse Width Alters waveform duty cycle for Pulse waveforms
12 Oct J, Oct K Pattern Octave Allows the octave of a Pattern to be shifted after
recording
27 Audio In Audio In Gain Adjusts the gain of the external audio input
10 Patches* Init Patch Loads Init Patch: resets all synth parameters to a
default state
Pattern (within
Pattern View)
Instant Pattern
Switching
A new Pattern will begin playing immediately
instead of waiting for the current Pattern to nish.
* available on software versions 1.1 or later.
To Next Page
Loading...
