13
Ter m Button Definition
Live Record Record
Lets you add samples in real time to a pattern while
it’s playing. Also records any movements of the Macro
controls.
Macro Controls
Eight rotary controls whose function varies with the
currently selected View; used to “tweak” the sample
sounds.
Manual Sample
Entry
Assignment of samples to specific step in a pattern. With
a step pad pressed, press the performance pad for the
sample to be added. Can be done with the sequencer
either running or stopped.
Micro step Shift + Gate
The interval between consecutive Steps in a Pattern is
further subdivided into six micro steps; these may be
used for “off-grid” timing of samples.
Mutate Shift + Duplicate
Randomises the Steps of a Pattern at which the assigned
samples will play.
Note View Note
A View that gives you a standard chromatic keyboard for
playing the selected sample.
Pack
A complete set of Projects and Samples. Up to 32 Packs
can be exported to a Micro SD card for external storage.
Pattern
A repeating sequence of up to 32 steps, on any of the
eight tracks. Includes per-step data for velocity, gate,
probability and automation.
Pattern Chain
A cyclic set of Patterns played continuously one after the
other.
Pattern memory
Where a Pattern is stored; there are eight per track in
each Project.
Pattern Settings
View
Pattern Settings
A View that lets you set Pattern start and end points,
Pattern rate relative to the BPM and Pattern play
direction.
Patterns View Patterns
This View displays the eight Pattern memories per
track (as two pages of four), and allows their selection
individually or as a Pattern Chain, deletion and
duplication.
To Next Page
Loading...