35
Step entry in Slice Note View will behave identically to Keyboard Note View described above. Switching
between Slice Note View and Keyboard Note View can often lead to happy accidents, and may be used as
a performance tool.
Live Slice Point Recording
Some samples won’t divide into 4, 8 or 16 slices, and the points at which you want to place slices may be
spread unevenly across the sample. This is where Live Slice Point Recording comes in very useful.
To live-record slice points, enter Expanded Note View while in Slice Note View. The slice pads will turn gold
at this point, indicating Live Slice Point Recording is primed.
Tap a slice pad to initiate Live Slice Point Recording. The selected sample will now play from the start of
the sample towards the end of the sample. As the sample plays back, tap a second pad to set that pad’s
start point, and the previous pad’s end point. Continue this process until you reach the end of the sample.
Now return to Note View, where you’ll find that your slices’ start and end points are set to the exact
moment that you recorded in Expanded Note View. To make a another attempt at live recording your slice
points, enter Expanded Note View again.
Note that Live Slice Point Recording cannot be used during sequencer playback
To Next Page
Loading...