38
Enter
Micro Step View by pressing Shift
20
and Gate
6
, or press Gate again if you are already in
Gate View. Pads 17 to 22 display the currently selected step’s micro step values. Press another step
pad to select it and view its micro steps.
1 2 3 4 5 6
PLAY
Pattern step display
Micro steps
1 2 3 4 5 6
(PRESS)
PLAY
Pattern step display
Micro steps
(PRESS)
Press a lit step pad to
display the micro step
value at the step
When only micro step 1 is
bright, the sample at the
selected step will be
exactly on the beat
Micro step 4 is bright: the
sample at the selected step
will be delayed by three
ticks (half a step interval)
If the first pad is illuminated (as in the first example above), it indicates that the sample at the
selected step will be precisely “on the beat” at the pattern step. In the second example above,
deselecting micro step 1 and selecting micro step 4 delays the hit by three-sixths of the interval
between steps.
You are not limited to tweaking sample timing – you can have the hit on as many micro steps as you
want: each micro step pad can be turned “on” or “off”. In the example below, Step 5 will trigger the
sample assigned to it three times, once on the beat and twice more two and four ticks later.
To Next Page
Loading...