88
Appendix
Firmware Updates
In order to access all features, you may need to update Circuit Rhythm to the latest firmware
version. Components will let you know whether the connected unit is up to date and, if it’s not,
Components can update the unit’s firmware to the latest version.
Setup View
Setup View is provided to allow “global” unit settings to be made: these include MIDI channel
assignment, MIDI I/O configuration, clock source selection, external clock rate and brightness
adjustment. It is entered by holding down Shift and pressing Save
19
, and exited by pressing
Play
13
.
Opening Setup View produces the display shown below:
9
5
11 1312 14 15 16
2 ppqn
Tx
On/Off
3 7
10
64 8
Rx
On/Off
1 ppqn
Rx
On/Off
Tx
On/Off
Rx
On/Off
Tx
On/Off
Rx
On/Off
Tx
On/Off
1 2
4 ppqn 8 ppqn 24 ppqn
MIDI Note data
MIDI Program
Change data
MIDI CC data
MIDI Clock control
Brightness
adjustment
1 87652 3 4
MIDI channels 1 -16
Pad 1 is brightly
illuminated,
indicating that the
currently selected
track (Track 1) is
assigned to MIDI
Channel 1 (the
default)
MIDI Channel
16 is reserved
for the Project
MIDI data control
Clock sync rates
Default external
clock sync rate
is 2 ppqn
Track 1 is currently selected: the track
number lights brightly.
Tracks 2 to 8 are
assigned to MIDI
Channels 2 to 8 by
default. The pads for
these Channels
illuminate dimly in the
colour of the track that is
assigned to them.
To Next Page
Loading...