90
MIDI I/O
Circuit Rhythm is able to send and/or receive MIDI data both via the USB port
6
and the MIDI In/
Out/Thru sockets
4
.
Setup View allows you to decide how you want Circuit Rhythm to operate with other MIDI equipment
for four categories of MIDI data independently: Note, CC (Control Change), Program Change (PGM)
and MIDI Clock. This ensures you have a high degree of flexibility in how Circuit Rhythm integrates
with the rest of your system.
MIDI Rx (receive) and Tx (transmit) can be enabled independently for each of the data categories.
Pads 25 to 32 are arranged as four pairs of buttons as shown in the table:
Pad Function Colour
25 MIDI Note Rx on/off
Green
26 MIDI Note Tx on/off
27 MIDI CC Rx on/off
Orange
28 MIDI CC Tx on/off
29 MIDI Program Change Rx on/off
Purple
30 MIDI Program Change Tx on/off
31 MIDI Clock Rx on/off
Pale Blue
32 MIDI Clock Tx on/off
By default, both MIDI Rx and MIDI Tx are ON (buttons brightly lit) for all data categories.
To Next Page
Loading...