12
Hardware Overview
Glossary
Some of the terms used in this manual have a specific meaning as applied to Circuit Tracks. Here is a
list:
Ter m Button Definition
Expanded View Shift + Note
Doubles the area of performance pads for the Synths,
and allows you create patterns on all drum tracks
simultaneously, using the currently selected samples.
Fixed Shift + Velocity
Allows the velocity response of the grid pads to be
disabled.
FX View FX
Allows the user to add reverb and delay to individual
tracks.
Gate View Gate
The Gate value of a note is how many steps it sounds
for. Gate View allows the length of a step to be edited.
Individual gate values can be set for each note assigned
to a single step by using live record.
Grid pad
One of the 32 pads making up the main performance
area.
Live Record Record
Lets you add synth notes in real time while a pattern
is playing. Also records any movements of the Macro
controls.
Macro Controls
Eight rotary controls whose function varies with the
currently selected View; primarily used to “tweak” the
synth and drum sounds.
Manual Note
Entry
Assignment of synth notes to specific step in a pattern.
With a step pad pressed, press the performance pad for
the note to be added. Can be done with the sequencer
either running or stopped.
Micro step Shift + Gate
The interval between consecutive Steps is further
subdivided into six micro steps; these may be used for
“off-beat” timing of synth notes and drum hits.
To Next Page
Loading...