14
Ter m Button Definition
Probability
A parameter of each step in a Pattern which defines how
likely it is that the synth note, MIDI note data or drum
hit assigned to the step will be played.
Probability View
Shift +
Pattern Settings
Lets you assign Probability values to each active step in
a track.
Project
A set of all necessary data for full playback of all tracks,
including Patterns, Sequences, automation data, etc. Up
to 64 Projects can be saved as a Pack in flash memory.
Record Mode
Circuit Tracks’ operating mode when synth notes can be
added to the Pattern, or when adjustments using the
Macro controls can be saved. The Record button will be
lit bright red.
Scale View Scales
Allows the user to select one of 16 musical scales for the
synth and also to transpose the scales.
Project View Projects The View used to save and load Projects.
Sample
Preset (with
Drum track
selected)
One of the 64 samples (two pages of 32) which can be
selected for each drum track.
Scene
Hold Shift (while
Mixer View is
selected)
One of 16 memories to which multiple Patterns and
Pattern Chains can be assigned, so that a longer
sequence can be triggered by a single pad. Scenes can
be further chained to create a Sequence.
Secondary View
Shift + button,
or double-tap a
button
All views accessed via using Shift in combination with
another button are referred to as secondary views.
These views may also be accessed by pressing the
corresponding button repeatedly to toggle between the
secondary and primary views.
Sequence A set of chained Scenes.
Setup Page Shift + Save
Allows control of MIDI clock and Tx / Rx settings, MIDI
channel selection for each track and pad brightness
adjustment. Normal operation is suspended while Setup
Page is open.
To Next Page
Loading...