26
PLAY
Pads 1-16: Pattern Steps
Pads 17-32: Drum samples
New drum sample
You can select a different drum sample while the Pattern is playing by simply pressing a different pad
on the lower two rows: you can use any of the four sample pages.
Now add a snare drum to other steps in the sequence in the same way by selecting Drum 2 in
Note View and choosing a different drum sample; snare drums are mainly in sample slots 3 or 4 of
a kit.. You can of course, have hits from Drum 1 and Drum 2 on the same step if you wish. Adding
further drum hits on tracks Drum 3 and Drum 4 is the same process.
If you want to delete a drum hit, just press its pad again: you can do this while the sequence is
playing or stopped. The brightly lit pads tell you where the hits are.
Now you can add synth notes. Press Synth 1 to open Synth 1 Note View. The lower two rows
represent a music keyboard, the upper two show you where you are in the sequence. When Play
is pressed, you can see the white pad progressing through the steps (and hear any drums you’ve
already programmed).
To Next Page
Loading...