90 91
FX Section
Circuit Tracks includes a digital effects processor (FX) which lets you add delay and/or reverb effects
to any or all of the tracks making up your Project. There is also a master compressor which is applied
to your mix by default.
Sixteen delay and eight reverb presets are provided, and you can select any one of each type. The
send levels from each track – i.e., how much reverb and/or delay is added – are individually adjustable
for each track using the Macro controls. Any effects added can be saved to the Project in the usual way.
Press FX
12
to open FX View.
FX on/off
Synth 1 Drum 4Drum 3Drum 2Drum 1
Synth 2
MIDI 1 MIDI 2
ProjectsSaveClear
Tempo
Swing
Tap Click Mutate Packs
4 Filter Envelope
1 Oscillator 5 Filter Frequency3 Amp Envelope
Active reverb
preset
Active delay
preset
Delay presets
Reverb presets
2 Oscillator Mod 6 Resonance 8 FX
7 Modulation
Each of the “peach” pads on Rows 1 and 2 calls up a delay preset, and similarly, the “cream” pads on
Row 3 enable reverb presets. By far the best way to evaluate the various effects is to listen to them,
most effectively using a single repeating hit like a snare drum. As a general rule though, the reverb
presets are arranged with increasing reverberation time from Pad 17 to Pad 24, and the delay presets
with increasing complexity from Pad 1 to Pad 16. All the delay presets feature feedback for multiple
echoes, and some include interesting swung timing and stereo “ping-pong” effects as well. In all cases,
delay time is related to the BPM: see the table on page 92 for a full list of presets.
To Next Page
Loading...