Novation SL MkIII - Notification Text

11
Examples:
Message Hexadecimal
Message Decimal
Description
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01 0x02 0x00 0x01
0x02 0x48 0x65 0x6c 0x6c
0x6f 0x00 0xf7
240 0 32 41 2 10 1 2 0 1
2 72 101 108 111 0 247
Set the third text object in the first column
to 'Hello'
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01 0x02
0x08 0x02 0x02 0x41 0xf7
240 0 32 41 2 10 1 2 8 2
2 65 247
Set the colour of the bar on the left of the
centre screen to green
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01 0x02 0x03 0x04
0x01 0x00 0x7f 0x7f 0xf7
240 0 32 41 2 10 1 2 3 4
1 0 127 127 247
Set the colour of the second object in the
fourth column to cyan
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01 0x02 0x00 0x01
0x02 0x48 0x65 0x6c 0x6c
0x6f 0x00 0x08 0x02 0x02
0x41 0xf7
240 0 32 41 2 10 1 2 0 1
2 72 101 108 108 111 0 8
2 2 65 247
Set the third text object in the first column
to 'Hello' and set the colour of the bar on
the left of the centre screen to green
Notification Text
It is possible to display a notification on the center screen. This can be used when state changes
that the user might have an interest in. The notification text will be displayed temporarily before
disappearing.
The notification text will not be displayed if both text lines are empty.
To do this, the 'Set notification text' c o m mand s h o u l d be used as follows:
Message Hexadecimal
Message Decimal
Description
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01
240 0 32 41 2 10 1
SysEx header
0x04
4
Set notification text command ID
Text Line 1
Text Line 1
String of up to 18 characters, followed by a
null (0x00) termination
Text Line 2
Text Line 2
String of up to 18 characters, followed by a
null (0x00) termination
0xf7
247
End of SysEx
Example:
Message Hexadecimal
Message Decimal
Description
0xf0 0x00 0x20 0x29 0x02
0x0a 0x01 0x04 0x4c 0x69
0x6e 0x65 0x20 0x31
0x00 0x4c 0x69 0x6e 0x65
0x20 0x32 0x00 0xf7
240 0 32 41 2 10 1 4 76 105
110 101 32 49 0 76 105 110
101 32 50 0 247
Sets the first line to "Line 1" and the
second line to "Line 2"