Messages From The Device
This section shows all the messages sent by the device when in
InControl
view.
All MIDI messages are sent via the InControl USB port.
Buttons
Buttons send the value 127 when pressed, and the value 0 when released. See the indices table
for the values for each button.
Examples:
Rotary Knobs
The knobs send two's complement encoded delta values. See the indices table for the values for
each rotary knob.
Examples:
Knob 1 turned slightly clockwise
Knob 2 turned slightly anti-clockwise
Faders
Faders send messages with a range of 0-127. See the indices table for the values for each fader.
Examples:
Fader 1 moved to the top of its range
Fader 6 moved to the middle of its range