EDITING & WRITING PROGRAMS
The parameter is “Drum played as” with a value of E3.
This parameter determines the note the Drum Program will be pitched at. This is not the note on the master keyboard that the
Drum Program is triggered from, ( this is not assignable ) but it is the pitch of the Program. This can be set with the higher Data
knob or directly using the master keyboard. To do this simply play the desired note on the master keyboard while holding down the
Page up button when this display is showing & the appropriate note value will automatically be inserted for the currently selected
Program. The range of this parameter is C-2 to G8. This parameter is memorised with a Program.
Writing of Drum Map Programs into memory is done in exactly the same way as Programs. Programs can be freely written into
Drum Map Programs & visa versa.
This parameter only takes effect when the program is situated within a Drum Map.
To Next Page
Loading...
