INPUTS SECTION
If no MIDI note is sent to the Supernova II Rack & the Constant gate parameter is set to Off no sound will be heard & if no signal is
present on the assigned Input at the moment the MIDI Note is played then no sound will be heard.
Now all that remains to be done is set up the Filter,Envelopes, LFOs & Effects to the type/settings that you require. Once that is
done then save the Program so you can recall it later. Some cool things can be done here. Filter sweeps can be carried out by the
envelopes. LFOs. LFOs of course can be synced to MIDI clock & used to Modulate the Oscillator Mix level thereby creating “Gater”
effects. In an unsynced mode & with the LFO range parameter set to Fast strange effects can be achieved when “Gating” the
Inputs at Khz ( similar to Decimator type effects ). Remember that Envelope 3 can also modulate the speed of the LFO that is used
for the “Gating” effect.
Input choices are memorised with the program so different programs could use different Inputs or even both at once by using
Oscillator 2 or 3 for the other Input.
To Next Page
Loading...
