Resonance/Width - Knob
LFO 2 - Button
This combination controls the amount of change to the Resonance ( Initially set by the Resonance knob ) by LFO 2. With the
Resonance Mod knob set to the central position there is no change to the Resonance. Anticlockwise of centre there will be an
increasing amount of Negative modulation. i.e. The Filter will become less resonant by LFO 2. Clockwise of centre the modulation
is Positive. i.e. The Filter will become more resonant by LFO 2.
When “Special” ( which are all Dual Filters ) Filter types are selected this parameter no longer modulates the Resonance of the
Filters but the spacing or “Width” between the 2 Filters Cutoff frequencies.
Resonance/Width - Knob
ENV 2 - Button
This combination controls the amount of change to the Resonance ( Initially set by the Resonance knob ) by ENV 2. With the
Resonance Mod knob set to the central position there is no change to the Resonance. Anticlockwise of centre there will be an
increasing amount of Negative modulation. i.e. The Filter will become less resonant by ENV 2. Clockwise of centre the modulation
is Positive. i.e. The Filter will become more resonant by ENV 2.
When “Special” ( which are all Dual Filters ) Filter types are selected this parameter no longer modulates the Resonance of the
Filters but the spacing or “Width” between the 2 Filters Cutoff frequencies.
Resonance/Width - Knob
ENV 3 - Button
This combination controls the amount of change to the Resonance ( Initially set by the Resonance knob ) by ENV 3. With the
Resonance Mod knob set to the central position there is no change to the Resonance. Anticlockwise of centre there will be an
increasing amount of Negative modulation. i.e. The Filter will become less resonant by ENV 3. Clockwise of centre the modulation
is Positive. i.e. The Filter will become more resonant by ENV 3.
When “Special” ( which are all Dual Filters ) Filter types are selected this parameter no longer modulates the Resonance of the
Filters but the spacing or “Width” between the 2 Filters Cutoff frequencies.
Resonance/Width - Knob
Wheel - Button
This combination controls the amount of change to the Resonance ( Initially set by the Resonance knob ) by the Mod Wheel. With
the Resonance Mod knob set to the central position there is no change to the Resonance. Anticlockwise of centre there will be an
increasing amount of Negative modulation. i.e. The Filter will become less resonant by the Mod Wheel. Clockwise of centre the
modulation is Positive. i.e. The Filter will become more resonant by the Mod Wheel.
When “Special” ( which are all Dual Filters ) Filter types are selected this parameter no longer modulates the Resonance of the
Filters but the spacing or “Width” between the 2 Filters Cutoff frequencies.
To Next Page
Loading...
