Novation TWITCH - Main Screen Overview; Virtual Deck Display; Track Display Information; Playback Modes

32
English
Main Screen Overview
Virtual deck
The virtual deck
20
shows the speed and position of a track. When a track is loaded, it changes
from black to white with a black ‘radius bar’. As the track progresses, the bar will rotate. The
circular progress bar around the edge is a visual representation of the location within the track,
and it will begin flashing when 20 seconds of the track is left to warn you that the track is coming
to its end.
NOTE: during normal play mode, the Touchstrip LEDs scroll from left to right during one rotation
of the virtual deck.
Track Display
When a track is loaded, its details – name
25
, artist
26
, length and pitched BPM
28
- are
displayed in the track title bar. If any of this information missing from the le it will simply not be
displayed. Below the track details, pitch
30
, Playback
32
, Repeat
33
and Performance Mode
34
parameters (as applicable) are displayed.
The time and remaining time are displayed in minutes and seconds.
The pitched BPM is the BPM of the track, as modied by the setting of the PITCH control
37
.
If PITCH is set to 0%, the pitched BPM will be the track’s own inherent tempo.
Clicking on Playback allows you to select the Playback Mode:
• Single means once the end of the track is reached, you will hear silence.
• Cont means when the end of the track is reached, the next track in the playlist will be
loaded and playback will continue.
Clicking on Repeat lets you set the Repeat Mode:
• OFF - no repeat
• ON - when the end of the track is reached, it will return to the start and playback will im-
mediately recommence.