53
English
Fader FX
Each deck may have an individual effect applied to the track playing on it, in addition to the
effects programmed in the master FX section described above.
19
27
28
28
enables Fader FX for the channel. The Channel
Fader
status is indicated by the topmost segment in the
bargraph meter being illuminated.
SELECT control
27
. The currently-applied effect
display
37
Repeater
Echo
Flanger
Rotating the SELECT control varies the effect parameter. The table below lists the parameters
that are controlled by the Channel fader and the SELECT rotary control for each of the available
EFFECT FADER SELECT CONTROL
Cutoff frequency Resonance
Cutoff frequency Resonance
Time
Repeater Time
Echo Time
Time
Flanger Time
To Next Page
Loading...