Saving a Synth Patch
A Synth Patch can be saved by pressing the WRITE button in Synth Mode. Doing so will activate the following page:
Patch Name is the name of the currently selected Synth Sound and XXX is the number (from 100-299) of
that Patch. Simply rotate the data encoder to select a different Patch number if required, then press WRITE
again to save the current Patch to that onboard memory slot.
If after the first press of the WRITE button, the screen shows:
(The message will appear temporarily and then the Xio will return to PLAY mode.)
Then the Xio GLOBAL setting has activated Memory Protect, which will mean onboard memory
cannot be overwritten. (See the GLOBAL Menu section for details.)
Providing Memory Protect (in the GLOBAL menu) is off, once the WRITE button has been pressed for
a second time, the LCD display will show:
The name of the Template can now be modified if required by using the Menus/Audio button to change the
character type from 0-9, A-Z, a-z or various punctuation, the data encoder to change the character and the
Octave up/down buttons to move the cursor
.
Pressing the WRITE button a third time will show the following (final) screen temporarily, before returning to
EDIT mode:
It is possible to abort the WRITE procedure at any stage by pressing another Mode/Menu button (e.g.
PLAY, EDIT, GLOBAL).
Patch Name
To Program XXX
MEMORY
PROTECTED
Program ReName?
Patch Name
PROGRAM SAVED
To Next Page
Loading...
