Template Individual Edit ‘MMC’ Menu
Page 1 is the same for all Template Edit Menus (Control Type – see CC Menu for details).
Page Number Page Name DATA Encoder selects…
2 Device ID Value between 0 and 127
3 MMC Command Type of MMC message
4 MIDI Ports Port routing for the control
Here is a detailed breakdown of each page of the individual Template Edit Menu once ‘MMC’ has been
selected on Page 1. Note that MMC can only be selected for buttons:
Edit Menu Page 2 – device ID selection
This page selects the device ID number for the MMC message. Rotating the DATA encoder selects a value
for XXX between 0 and 127.
Edit Menu Page 3 – MMC Command selection
This page selects the type of MMC message that is transmitted. XXX is selected to be one of the following choices:
Stop
Play
Def Play
For
war
d
Rewind
Record
Recor
d Exit
Record Pause
Pause
Eject
Chase
Err Reset (Error Reset)
MMC Reset
The last page of the Menu for MMC messages is the MIDI routing Page that is also the last page for CC numbers
(see previous pages).
Device ID:
XXX
MMC Command:
XXX
To Next Page
Loading...
