KBD+JOY – The keyboard and Joystick will play the Synth (and the data encoder will select the sound
being played)
KBD+PAD – The keyboard and Touchpad will play the Synth (and the data encoder will select the sound
being played)
KBD+PAD+JOY – The keyboard, Touchpad and Joystick will all play the Synth (and the data encoder will
select the sound being played)
Edit Menu Page 9 – Hybrid Mode 2 Activation
This page activates Hybrid Mode 2, where the Xio onboard Synth can be played by incoming MIDI data
received over USB. This means that all of the Xio controls (knobs, buttons, pad, stick) and keyboard could be
MIDI controlling various software or hardware, whilst the synth is being simultaneously played by a track
within the sequencer. Use the data encoder to set this to On or Off. When set to On, the data encoder is
used to select the Xio onboard sound being played by incoming MIDI data, when playing the Template.
This parameter helps select the synth patch that is used by the current template when either of the hybrid
modes ar
e active. Use the data encoder to set this to On or Off.
When set to On, the currently selected synth patch will be used as the global hybrid synth patch. This is the
same patch used across all templates that use hybrid mode and have global hybrid turned on.
If this is turned off, the template can reference a unique synth patch stored with the template. This is the
current synth patch when the template is written to memory.
Synth By MIDI:
XXX
Global Hybrid
OFF
To Next Page
Loading...
