Minimonsta (continued)
Touchpad is assigned Filter Cut (x-axis) and Emphasis (y-axis) throughout.
Setup
No setup is required for the Template to work.
Oddity
Layout
Group A
Knob 1: V1 FNTNE
Knob 2: VCO 1 Level
Knobs 3-5: VCF Frequency, Resonance and Mod 3 Amount
Knob 6: LFO Frequency
Knobs 7-10: Amp Attack, Decay, Sustain and Release
Knob 11: VCA Mod Level
Button 1: No Control
Button 2: VCO 1 Tri/Square
Buttons 3 and 4: No Control
Button 5: VCF Mod 3 Source
Button 6: Tempo LFO Sync
Button 7: ADSR Gate Repeat
Button 8: ADSR Repeat Auto
Buttons 9 and 10: No Control
Button 11: VCA Mod Source
Group B
Knob 1: VCO2 Fine Tuning
Knob 2: VCO 2 Level
Knob 3: HPF Cutoff Frequency
Knobs 4 and 5: VCF Mod 1 and Mod 2 Amount
Knob 6: LFO Frequency
Knobs 7 and 8: AR Attack and Release
Knobs 9 and 10: Velocity to VCA and Velocity to VCF
Knob 11: Portamento
Buttons 1 and 2: VCO 2 Sync and Tri/Square
Button 3: No Control
Buttons 4 and 5: VCF Mod 1 and Mod 2 Source
Button 6: Keyboard LFO Retrig
Button 7: AR Gate Repeat
Buttons 8-10: No Control
Button 11: Mono/Duo Mode
Touchpad is assigned VCF Resonance (x-axis) and VCF Cutoff Frequency (y-axis) throughout.
To Next Page
Loading...
