Need help?Do you have a question about the Nox Medical T3 and is the answer not in the manual?
General| Brand | Nox Medical |
|---|---|
| Model | T3 |
| Category | Medical Equipment |
| Language | English |
Connect the Nox T3 recorder to a computer using the USB connector.
Start or stop recording manually by pressing the middle button.
Demonstrates attaching recorder and sensors to the patient.
Steps to pair the Nox T3 recorder and the oximeter.
Insert fresh/charged batteries into both devices.
Turn on the oximeter by inserting a finger or pressing the activation button.
Turn on Nox T3 and display 'Connecting to' message with PIN.
A checkmark on Nox T3 signifies successful pairing.
Indicates pairing failure; restart oximeter and retry pairing.
Mismatched PINs prevent connection; reconfigure in Noxturnal.
Lists Nonin WristOx2 Pulse Oximeter model and catalogue number.
Details storage capacity, recording time, and internal/external channels.
Provides guidance on selecting battery types for study duration.
Describes use of Bluetooth 2.0 for receiving signals from external modules.
Portable RF devices can affect Nox T3 performance; maintain separation.
Avoid adjacent or stacked use without observation to prevent abnormal operation.
Use only approved accessories to prevent emissions/immunity issues.
Nox T3 may be interfered with by other equipment.
Equipment complies with Class B digital device limits for residential interference.
Device complies with Industry Canada RSS 210, subject to conditions.
Nox T3 is Group 2, Class B for RF emissions; nearby equipment may be affected.
Device is protected against ESD up to ±6 kV contact and ±8 kV air.
Device is protected against fast transients/bursts on power supply lines.
Device is protected against surges on power supply lines and earth.
Device is protected against voltage dips and interruptions.
Device is immune to conducted RF energy up to 3 Vrms.
Device is immune to radiated RF energy up to 3 V/m.
Guidelines for separation distance from RF transmitters.
Table showing separation distance based on transmitter power and frequency.
To Next Page
