Need help?Do you have a question about the nox Hummer Vault and is the answer not in the manual?
General| Type | Full Tower |
|---|---|
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Side Panel | Tempered Glass |
| Material | Steel, Tempered Glass |
| Color | Black |
| Lock Type | Key Lock |
Lists numbered parts of the chassis for identification.
Details specific screws and accessories required for installation.
Instructions for detaching the side and front panels.
Steps to detach the chassis's top, bottom, and rear plates.
Process for unscrewing and removing HDD/Fan and side brackets.
Preparing the rear I/O shield area for motherboard installation.
Positioning the MATX motherboard correctly within the chassis.
Fastening the installed MATX motherboard with appropriate screws.
Detaching the hard drive enclosure from the motherboard tray.
Removing the micro PSU enclosure and placing the ATX PSU.
Fastening the ATX power supply unit with screws.
Installing SSD/HDD units using gaskets and specific screws.
Mounting the SFX power supply unit using hexagonal screws.
Attaching the power supply bracket to the front plate.
Preparing the rear I/O shield area for ITX motherboard installation.
Positioning the ITX motherboard correctly within the chassis.
Detaching the micro HDD enclosure from the motherboard tray.
Removing micro PSU enclosure and placing the ATX PSU.
Fastening the ATX power supply unit with screws.
Installing SSD/HDD units using gaskets and specific screws.
Mounting the Micro power supply unit using hexagonal screws.
Attaching the power supply bracket to the front plate.
Positioning the HDD and PSU enclosure at the chassis rear.
Fastening components from the motherboard tray's rear side.
Maximum CPU cooler height with horizontal GPU and no side bracket.
Maximum CPU cooler height with vertical GPU installed.
Detaching the magnetic PCI bay from the chassis.
Inserting and fastening the graphics card into the PCI slot.
Detaching and unscrewing the magnetic PCI bay cover.
Installing the GPU and connecting necessary cables.
Maximum GPU length with Micro PSU mounted at the front.
Maximum GPU length with ATX PSU mounted.
Maximum GPU length for ITX with Micro PSU at motherboard tray.
Installing SSD/HDD onto the HDD/Fan bracket.
Installing SSD/HDD onto the left fan bracket.
Placing SSDs in the front panel location indicated by screw holes.
Using motherboard screws to fix the SSDs in the front panel.
Fixing water cooler to bracket and bracket to chassis bottom.
Fixing the 8cm fan with correct orientation and securing from the back.
Installing 12cm fans onto the top panel bracket.
Installing 12cm fans onto the bottom HDD/Fan bracket.
Installing 12cm fans onto the left HDD/Fan bracket.
To Next Page