Need help?Do you have a question about the NOYAFA NF-816 and is the answer not in the manual?
General| Wiremapping | Yes |
|---|---|
| Length Measurement | Yes |
| Power Source | Battery |
| Display | LCD |
| Dimensions | 160 x 80 x 30mm |
Connects transmitter to cables for locating signals, with options for grounded earth or non-shielded drop wire.
Guides on tracing buried electrical wires, CATV, telephone, and metallic pipes using the "Cable Scan" mode.
Explains how to determine the approximate depth of buried wires by identifying null points at a 45-degree angle.
Details how to locate wires hidden behind walls by sweeping for a PEAK signal with the receiver antenna.
Describes locating specific circuit breakers for outlets in commercial/residential settings using tone and null signals.
Guides on marking precise locations for drilling based on signal detection through walls and ceilings.
Helps identify which outlets belong to a particular electrical circuit by checking for a tone at the receptacle.
Instructions for tracing various types of wires like alarm, sound, and computer cables by connecting one transmitter lead.
How to connect a 3.5mm earphone to the receiver for better audio in noisy environments.
Method for finding receptacles concealed behind drywall by scanning walls for signal peaks.
Describes activating the LED flashlight on the receiver unit by pressing the "Push To Lamp" button.
Lists electrical characteristics like output voltage, output frequency, carrier, and audio modulation.
Details physical dimensions and weight of the device (816T, 816R) and the complete kit.
Specifies the recommended operating and storage temperature ranges in Celsius and Fahrenheit.
Instructions on how to safely replace the batteries in the transmitter and receiver units.
Guidelines for cleaning the device using a damp cloth and mild detergent, avoiding abrasives or solvents.
Procedure for returning the tester for repair or replacement through the local distributor.
To Next Page
