Switch to unlock. Press the beep mode button. The
green LED indicator light should ash. You're ready to
go! Flashing red? Simply charge with the included USB
cable and test again once the light is continuously
green.
Checking Performance:
Gentle, natural, and eective. This device is proven to
shift ingrained behaviors by starting with beep mode,
then advancing to ultrasonic + sonic frequency +
nighttime ashlight mode, then to ultrasonic + sonic
frequency mode.
Step 2. Test 3 Training Modes
Hold the device within 50 feet of your dog. When the
dog barks, speak your command (ex. Stop! Hush!
Quiet!), then press the beep mode button once. If
your dog continues barking without a break, hold the
button down until your dog stops. If your dog barks
again after a break, push beep mode once more.
Grab Attention with Beep Mode:
To Next Page
Loading...